Young's Machine Co. - Used Equipment

490-T15DBA

CAPACITY:

Payload:	13880 kg	30600 lbs
Volume, Heaped:	7.9 cu. m.	10.2 cu. yds

DISCHARGING:

Approximate Time = 16 seconds

VEHICLE SPEEDS:

Forward with 3% rolling resistance

1st	2nd	3rd	4th	5th	6th
2.3 mph	5.4 mph	6.3 mph	7.2 mph	11 mph	14.5 mph
3.7 kmh	8.7 kmh	10.2 kmh	11.6 km	17.7 kmh	23.4 kmh

Reverse

2.3 mph	5.4 mph	11 mph
3.7 kmh	8.7 kmh	17.7 kmh

ENGINE:

Deutz Diesel:	Model BF6M1013CP
MSHA Power Rating @ 2300 rpm:	174 kW (210 hp)
Max Torque @ 1500 rpm:	947 Nm (698 ft. lbs.)
Number of Cylinders:	6, inline
Displacement:	7 L (436 in3)
Cooling:	Liquid
MSHA Ventilation:	651 m3/min. (20,000 cfm)

ENGINE (Options):

Deutz Diesel:	F10L-413FW
MSHA Power Rating @ 2300 rpm:	172 kW (231 hp)
Max Torque @ 1500 rpm:	810 Nm (597 ft. lbs.)
Number of Cylinders:	10, in "V"
Displacement:	16 L (973 in3)
Cooling:	Air
MSHA Ventilation:	566 m3/min. (20,000 cfm)

Deutz Diesel:	F8L-413FW
MSHA Power Rating @ 2300 rpm:	138 kW (185 hp)
Max Torque @ 1500 rpm:	617 Nm (455 ft. lbs.)
Number of Cylinders:	8, in "V"
Displacement:	12.8 L (779 in3)
Cooling:	Air
MSHA Ventilation:	453 m3/min. (16,000 cfm)

GENERAL DIMENSIONS:

Overall Length:	284 in	721.4 cm
Overall Width:	90 in	228.6 cm
Wheel Base:	153 in	388.62 cm
Machine Height:	73 in	185.4 cm
Operator's Height:	87 in	221.0 cm

EXHAUST CONDITIONER:

Catalytic Purifier

ELECTRICAL SYSTEM:

24 Volt on 413 Engines, 12 Volt on 1013 Engines

TRANSMISSION:

John Deere / Funk Model 2000 Full Power Shift
6 speed forward, 3 speed reverse
Heavy duty John Deere / Funk single stage convertor
Electric shift control

AXLES:

John Deere 1400 Series with DIF-LOK
Spiral Bevel Gear Differential, Planetary Hubs
70,000 pounds rating per axle
72 N Series drivelines and u-joints

STANDARD BRAKES:

Service:	Hydraulically applied inboard multi-wet disk brakes. 4 wheel.
Emergency/Parking:	Spring applied, Hydraulic released on each axle.

TIRES:

Tubeless type, hard rock tread design
14:00 x 24 28-Ply E3 on demountable rims

STEERING:

Articulated with hardened spherical radial bearings
3-1/2" Pins with replaceable bushings
Inherent Bi-Directional Orientation
Joystick type steering

HYDRAULIC SYSTEM :

Joystick type dump applicator
(2) 5 in. diam hoist cyls. (2) 4 in. diam. steering cyls.
Heavy duty gear type hydraulic pump
38 gallons per minute at 2,300 rpm

TANK CAPACITIES :

Fuel:	1.90 Liters	50 U.S. Gallons
Hydraulic:	1.71 Liters	45 U.S. Gallons

OPERATING WEIGHT :

Empty Appx.:

13154 Kg

29,000 lbs

OPERATOR'S COMPARTMENT :

Extra-roomy side seating for bi-directional operation and maxiumum visibility. Passenger seat.

OSCILLATION:

Center Section: Hardened spherical radial bearings
Degree of Oscillation: 24 degrees total

We reserve the right to change operating specifications and equipment designs without prior notice to insure optimal performance.